Load data for 30-30 Ackley Improved + .308 | 123gr | Reichenberg HDB Universal

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 123gr \| Reichenberg HDB Universal
Bullet Weight:	123gr \| 8.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B10147_C330
Last updated:	2026-02-04
Recommended Twist Rate:	1:16 - 1:13

Load data for 72 loads in caliber 30-30 Ackley Improved with .308 | 123gr | Reichenberg HDB Universal bullet and 36 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	86%	40683	88%	**66	100%
ADI AR 2219	<<locked>>	90%	41075	88%	**02	96%
Accurate 2015	<<locked>>	96%	40973	88%	**82	98%
[Accurate 2460]*	<<locked>>	94%	41118	89%	**72	93%
Accurate 2495	<<locked>>	96%	32721	70%	**07	96%
[Accurate 2520]*	<<locked>>	97%	36782	79%	**46	93%
Alliant AR-Comp 👍	<<locked>>	97%	36927	80%	**72	99%
Alliant Reloder-10x 👍	<<locked>>	93%	41713	90%	**08	99%
Alliant Reloder-7	<<locked>>	85%	41046	88%	**39	99%
Baschieri & Pellagri 106	<<locked>>	90%	41394	89%	**07	97%
[Hodgdon Benchmark]*	<<locked>>	94%	40698	88%	**13	92%
[Hodgdon CFE BLK]*	<<locked>>	86%	41452	89%	**87	92%
Hodgdon H322	<<locked>>	96%	41075	88%	**02	96%
Hodgdon H335	<<locked>>	91%	41423	89%	**05	95%
Hodgdon H4198	<<locked>>	87%	40944	88%	**93	96%
[IMR 3031]*	<<locked>>	96%	31734	68%	**54	94%
IMR 4198 👍	<<locked>>	91%	41452	89%	**59	99%
[Lovex D073.4]*	<<locked>>	93%	41075	88%	**62	93%
[Lovex D073.5]*	<<locked>>	95%	41597	90%	**82	93%
Norma 200 👍	<<locked>>	89%	40901	88%	**82	99%
[Norma 202]*	<<locked>>	96%	35360	76%	**93	93%
[ReloadSwiss RS 40]*	<<locked>>	93%	41104	89%	**72	94%
[Rottweil R 901]*	<<locked>>	96%	38914	84%	**36	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	41669	90%	**56	100%
SNPE Vectan SP 10	<<locked>>	90%	40886	88%	**92	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	38986	84%	**70	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	31314	67%	**20	92%
[Somchem S321]*	<<locked>>	95%	40828	88%	**85	92%
Somchem S335	<<locked>>	96%	37652	81%	**74	95%
Vihtavuori N120	<<locked>>	89%	41698	90%	**36	100%
Vihtavuori N130	<<locked>>	95%	41046	88%	**39	99%
Vihtavuori N133	<<locked>>	97%	35766	77%	**44	96%
[Vihtavuori N140]*	<<locked>>	97%	33823	73%	**28	93%
[Vihtavuori N530]*	<<locked>>	96%	41307	89%	**85	92%
[Vihtavuori N540]*	<<locked>>	97%	33591	72%	**41	92%
[Winchester 748]*	<<locked>>	96%	40886	88%	**02	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	34243	74%	**51	100%
[ADI AR 2219]*	<<locked>>	81%	30560	66%	**69	92%
[Accurate 2015]*	<<locked>>	81%	25483	55%	**38	93%
[Accurate 2460]*	<<locked>>	89%	33765	73%	**28	90%
[Accurate 2495]*	<<locked>>	85%	22089	48%	**24	90%
[Accurate 2520]*	<<locked>>	93%	31850	69%	**34	90%
[Alliant AR-Comp]*	<<locked>>	81%	22800	49%	**88	93%
Alliant Reloder-10x	<<locked>>	81%	28152	61%	**23	95%
Alliant Reloder-7	<<locked>>	81%	35766	77%	**34	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	31314	67%	**03	93%
[Hodgdon Benchmark]*	<<locked>>	90%	35636	77%	**15	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	38348	83%	**25	90%
[Hodgdon H322]*	<<locked>>	83%	27572	59%	**87	90%
[Hodgdon H335]*	<<locked>>	82%	30414	66%	**62	90%
[Hodgdon H4198]*	<<locked>>	81%	34867	75%	**69	94%
[IMR 3031]*	<<locked>>	90%	26339	57%	**00	90%
IMR 4198	<<locked>>	81%	30661	66%	**33	97%
[Lovex D073.4]*	<<locked>>	88%	34838	75%	**41	91%
[Lovex D073.5]*	<<locked>>	89%	33533	72%	**21	90%
Norma 200	<<locked>>	81%	32024	69%	**02	97%
[Norma 202]*	<<locked>>	90%	29269	63%	**46	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	33185	71%	**11	90%
[Rottweil R 901]*	<<locked>>	87%	30066	65%	**33	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	38232	82%	**06	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	30618	66%	**72	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	30342	65%	**93	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	27528	59%	**21	90%
[Somchem S321]*	<<locked>>	91%	35737	77%	**84	90%
[Somchem S335]*	<<locked>>	86%	27383	59%	**41	90%
Vihtavuori N120	<<locked>>	81%	32343	70%	**69	100%
[Vihtavuori N130]*	<<locked>>	81%	27282	59%	**41	94%
[Vihtavuori N133]*	<<locked>>	83%	23931	52%	**39	90%
[Vihtavuori N140]*	<<locked>>	92%	29617	64%	**26	91%
[Vihtavuori N530]*	<<locked>>	92%	37028	80%	**00	90%
[Vihtavuori N540]*	<<locked>>	93%	30110	65%	**62	90%
[Winchester 748]*	<<locked>>	92%	36071	78%	**03	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data